Dialogic

Eiconcards

Eicon is the world’s leading provider of PC-based X.25 connectivity solutions with an installed base exceeding 400,000 units. The Eiconcard hardware, software and development tools provide network interfaces for embedded systems such as point of sale and reservation terminals, automated teller machines and private branch exchanges.

The Eiconcard adapters come in several formats, designed to meet special needs:

Eiconcard C-Series

The C Class adapters are entry level, active cards supporting wide-area network (WAN) speeds up to 64Kbps, 512Kb memory. They are an intelligent multi-protocol WAN interface card for PCI, ISA and PCMCIA based workstations. The C Series of WAN interface cards are targeted for X.25 or SDLC gateways and very small branch office application servers.

  • All C-series Eiconcards are a multiprotocol, plug and play (ISA, PCI, PCMCIA) communication platform, which have flash memory, an on-board CPU, V.24 and ISDN ports and worldwide certification.
  • Offers connectivity through V.24 and/or ISDN ports, supporting line speeds of up to 64 Kbps and 128 Kbps respectively.
  • Allows you to connect over a variety of WAN protocols such as X.25, Frame Relay, PPP, SDLC and HDLC, over leased lines, dial-up lines or ISDN lines. It offloads the server from low level protocol processing tasks, resulting in a saving of valuable server CPU resources.
  • The Eiconcard C Series works in conjunction with Eicon Networks' software, and is supported by Eicon Networks' development tools and third-party products.
  • Support Technicians can benefit from the Eiconcard C31, an active PCMCIA WAN adapter which will allow technicans to take test tools and applications on site.
  • The Eiconcard C Series offers a comprehensive warranty of 5 years.
Eiconcard S-Series

The Eiconcard S Series are intelligent multi-protocol wide-area network (WAN) interface cards for PCI & ISA bus based servers that are ideal for branch office LAN application servers. They offer a Very High Speed Interface (VHSI) port and an ISDN BRI port, supporting line speeds of up to 2 Mbps (T1/E1) and 128 Kbps respectively.

  • All S-series Eiconcards are a multiprotocol, plug and play (PCI, PCMCIA) communication platform, which have 2MB RAM, an on-board CPU, Serial and ISDN ports, data compression, and worldwide certification.
  • Allows you to connect over a variety of WAN protocols such as X.25, Frame Relay, PPP, SDLC and HDLC, over leased lines, dial-up lines or ISDN lines. It offloads the server from low level protocol processing tasks, resulting in a saving of valuable server CPU resources.
  • Works in conjunction with Eicon Networks'’ connectivity software, and is supported by Eicon Networks' development tools and third-party products.
  • NEW - The Flagship product for the S Series now comes with a 3V, 64 bit 66MHz PCI interface. The Eiconcard S94 66MHz is the highest performing and fastest Eiconcard available - now compatible with PCI-X slots.
  • NEW - The Eiconcard S91 V2 is now released with 3V, 32bit 66MHz PCI interface.
  • The Eiconcard S Series offers a comprehensive 5-year warranty.
EiconCard P-Series

The Eiconcard P Series adapter is a high performance passive card for PCI based servers that is ideal for leased line connectivity over PPP and Frame Relay and for branch office LAN application servers, when low latency coupled with high frame forwarding capability is required.

  • The Eiconcard P92 offers two Very High Speed Interface (VHSI) ports supporting line speeds of up to 5Mbps, while the Eiconcard P93 offers one VHSI and one integrated CSU/DSU. Its “smart cable interface” automatically detects the cable in use (V.24, V.35, X.21, V.36/RS-449, EIA-530).
  • The Eiconcard P Series performs low-level framing while protocol stack processing (PPP and Frame Relay) is performed on the PC.
  • The P Class cards are designed for close integration with Microsoft and Novell. These adapters get their protocol support from the Operating System and their role is to provide high speed reliable data communications level support. They are Microsoft HCL (Hardware Compatibility List)
  • The latest product – the Eiconcard P93 is ideal for embedded development, providing a dual port adapter with integrated CSU/DSU for cost and space saving.
  • The Eiconcard P92 for Windows can be used with such Microsoft applications as the Routing and Remote Access Service (RRAS) or the router built into Microsoft® Windows NT® 4.0. In addition, the Eiconcard P92 supports Microsoft SNA Server.
  • The Eiconcard P Series offers a comprehensive 5-year warranty.